The 2140-C 3-Way Switching
Flashhead contains the controls to operate at full power or
ratio the power and the modeling light down one stop (-1) or
two stops (-2). The flashhead cannot be turned completely off.
The 2140-C Flashhead comes equipped with a 1000 watt-second
flash tube (color corrected to 5500'K), 100 watt tungsten
modeling lamp, 25' cord, and a mounting bracket with knobs for
securing the bracket to a light stand and attaching an
umbrella. This bracket also has a universal adapter base which
allows it to mount to either a standard 5/8'' stud or a
smaller 3/8'' tube/stud.
CAUTION:
This flashhead must not be used in the stop down mode if it is
the only head plugged into a powerpack. There must be another
flashhead plugged into the same pack and set to operate at
full power or damage to the 2140-C will result. This will void
the warranty.
|