Description
Saramonic SmartRig Di, Single-Channel Mic and Guitar Interface with Lightning Connector for iOS Devices
The Saramonic SmartRig Di, Single-Channel Mic and Guitar Interface with Lightning Connector for iOS Devices s a single-channel audio interface that allows you to connect a professional microphone or guitar to your iPhone, iPad, and iPod touch. With a lightning connector output, the interface can be used to record sound or music to your iOS portable device.The SmartRig Di provides 48V of phantom power using a 9V battery for condenser microphones and is equipped with a single combo 1/4" XLR input, and an 1/8" headphone output for real-time monitoring. In addition, there is a rotary gain control that makes it easy to set levels.
Features:
- Combo 1/4" and XLR Input
- Lightning Output Connector
- Powered by a Single 9V Battery
- +48V Phantom Power
- 1/8" Headphone Output for Monitoring
- Gain Control
Specifications
- Frequency Response:
- 20 Hz to 20 kHz +/-0.5 dB
- Total Harmonic Distortion (THD):
- Less than 0.01% @ 1 kHz, -30 dBu input
- Signal to Noise Ratio:
- 80 dB @ 1 kHz, -30 dBu input
- Input:
- 1 x Combo 1/4" / 6.35 mm and XLR input
- Output:
- Lightning connector output cable
- Headphone Output:
- 1/8" / 3.5 mm jack
- Gain:
- + 23 dBu to - ∞
- Phantom Power:
- 48 V power on/off switch
- Power Requirements:
- 1 x 9 V alkaline or lithium battery
- Gain Control:
- Yes
- Dimensions:
- 3.5 x 1.6 x 1.7"
- Weight:
- 2.6 oz
