Nanlite Control Bank
The Nanlite Control Bank provides advanced control and rechargeable battery power to the PavoTube T8-7X LED Pixel Tube and PavoBulb 10C LED Light Bulb. It plugs into the USB-C port on the light and provides 4 control buttons, a display for making adjustments to the settings, and external battery power. This makes it possible to change advanced parameters like green-to-magenta shift without needing to use the NANLINK mobile app. There are often times on set when it's perferable not to use a smartphone for control, for example, when the phone is low on battery. Having the Nanlite Control Bank gives you more control options. It's an all-in-one solution for external battery power and quick parameter adjustments, and a USB-C port is built-in for future firmware updates.
4 Buttons For Deeper Control
The PavoTube T8-7X and PavoBulb 10C both have simplified built-in controls that you can operate without needing a display. When you connect the Control Bank to these lights, you gain 4 control buttons: Mode, Switch, Minus, and Plus. This makes it possible to make deeper adjustments to the parameters of the attached light.
A Display for PavoTube T8-7X and PavoBulb 10C
The PavoTube T8-7X LED Pixel Tube and PavoBulb 10C LED Bulb both operate without a display. When you connect the Control Bank, a display is provided that makes it possible to fine-tune the settings of the light without needing to use the NANLINK app.
Shoot Longer with the External Battery
In addition to getting additional control buttons and a display, the Control Bank also provides additional battery power to the PavoTube T8-7X and PavoBulb 10C so you can work longer when shooting in the field.
Control Without the App
Sometimes you may perfer not to use the NANLINK app for control, such as when your phone isn't available or the battery is low. The Control Bank allows you to fully control your PavoTube T8-7X tube lights and PavoBulb 10C light bulbs without needing to operate a mobile device running an app.
- Built-In Rechargeable Li-Ion Battery
- Control Lamp Output without NANLINK App
- 4 Analog Control Buttons, On/Off Switch
- Monochrome LCD Display
- Runtime: 1 Hour at 100% Brightness
- USB Type-C Port for Firmware Updates
- Accessory Port(s):
- Operating Temperature:
- Includes Rechargeable Battery:
- Battery Capacity (Wh):
- Battery Chemistry:
- Battery Included:
- Battery Maximum Output Voltage:
- Battery Required:
- Charge Time to Full (Hours):
- 2 hours
- Runtime @ 100% Brightness (Hours):
- 1 hour
In The Box
6 and 12 Month Special Financing* Available
On purchases of $299 or more. Online through Klarna, available at checkout.