Sony ECM-W2BT Camera-Mount Digital Bluetooth Wireless Microphone System
Take the hassle out of vlog and interview audio with the wireless ECM-W2BT. Because it's wireless, it allows stress-free shooting and delivers clear audio in diverse environments, without worrying about the direction of the mic or the distance from the mic.
Effortless high-quality audio
Clear audio pickup from any direction
The ECM-W2BT can be positioned close to the speaker's mouth with a clip. The omnidirectional mic capsule also helps to pick up your voice clearly wherever it's coming from, so there's no need to worry about which way the unit is facing.
Effective noise suppression during audio transmission
Unlike conventional analog audio transmission, you'll never need to worry about cable signal interference. Just pair the ECM-W2BT with any Sony camera that supports a Digital Audio Interface via a Multi Interface (MI) Shoe for clear, low-noise, all-digital audio.
Simple audio optimization for any source
An attenuator function lets you easily adjust recording levels appropriately to match the source. Simply flip a switch to reduce the level of very loud sounds or amplify quiet ones, for optimized audio levels.
Clear sound even outdoors in the wind
The unit comes with a wind screen, allowing comfortable recording when shooting outside. Just attach the wind screen to the mic, and it effectively reduces wind noise as well as breath noise, for clear and stable sound even when shooting outdoors on a windy day.
Stable transmission between microphone and receiver
Qualcomm aptX Low Latency Bluetooth codec is used for transmission between the microphone and receiver units, ensuring low latency and undiminished audio quality. It helps avoid the stress of having to re-record audio due to interruptions in the recorded sound, and low latency enables better matching of the audio track with the video imagery.
Stable audio recording
Thanks to a capacity twice as large as with conventional setups, the improved wireless connectivity greatly reduces the risk of interruption to the audio stream, even in crowded settings with a lot of wireless activity. In a location with good visibility without obstacles, communication is possible at up to 600 ft, allowing greater flexibility in camera and audio setups.
Long battery life for extended shoots
There's no need to worry about battery life even during a day of extended outdoor shooting, thanks to the long battery life of the ECM-W2BT. When paired with cameras which support power supply via an MI Shoe, you can shoot up to nine hours wirelessly
Dust- and moisture-resistant construction
With its moisture- and dust-resistant design, the ECM-W2BT is set up for comfortable outdoor shooting. Its components incorporate weather-sealed seams and port covers to help maximize dust and moisture resistance.
One microphone, multiple setups
Support for two-person shoots
When you're shooting with a two-person configuration (on-camera performer and camera operator), you can still depend on the ECM-W2BT for your audio needs. In addition to the main wireless microphone there's also an internal microphone inside the receiver unit, allowing you to record both the camera operator and the main subject.
Even multi-person shoots are easily handled
Set the mic in a central position by using the connector protect holder included with the unit as a microphone stand. The omnidirectional microphone will capture audio from everyone, even when shooting multiple people.
Expandability with a 3.5 mm stereo mini-jack
Add that extra professional touch to vlog production with a more realistic-sounding audio track. The microphone is expandable via the 3.5 mm stereo mini-jack on the transmitter, and an ECM-LV1 can be connected for high-quality stereo sound.
In addition to simple connections to Sony cameras equipped with an MI Shoe, the ECM-W2BT can also be used with a wide variety of other cameras and equipment. A 3.5 mm stereo mini-jack output lets you connect the receiver to other cameras, PCs, digital voice recorders, or any device with an analog audio input.
Perfectly paired with the ECM-LV1 microphone
The all-black, simple and unobtrusive design of the ECM-LV1 enables distraction-free audio recording, for use with any type of clothing. The clip rotates 360 degrees, which allows it to be positioned anywhere on your clothing.
Mobile and convenient
Compact and lightweight design for mobility
The ECM-W2BT is light in weight and easy to carry, providing excellent mobility especially when shooting outdoors. The microphone unit weighs in at just 0.95 oz while the receiver is 0.99 oz, so they won't weigh you down during a shoot.
Easy, cableless configuration for stress-free shooting
With a Sony camera equipped with an MI Shoe you can enjoy a cable-free setup, eliminating worries about troublesome cables and accidental disconnection. The Digital Audio Interface available on compatible cameras also ensures pristine, high-quality digital sound.
Conveniently adjustable audio pickup modes
A switch on the receiver lets you select from three available pickup modes—microphone only, receiver only, or a mix of both microphone and receiver.
Protection against recording failures
The ECM-W2BT features clear indicator LEDs on the receiver for peace of mind while recording. A LINK lamp shows the status of communication between the microphone and receiver, while a POWER lamp indicates remaining battery charge.
The connector protect holder included with the ECM-W2BT can be used to carry the receiver and microphone together as one unit. The holder is designed to make it easy to use the receiver and microphone in combination, and it also functions as a handy storage unit when you want to take the ECM-W2BT with you somewhere.
- For Vlogs, Interviews, Videos & YouTube
- Stable, Interference-Free Wireless
- Clip-On Transmitter/Mic with 3.5mm Input
- Compact MI Shoe-Mount Receiver with Mic
- Dialog, Interview & VO Pickup Options
- Power & Digital Audio via MI Interface
- 3 Hr Rechargeable Batteries, 9 Hr via MI
- Dust and Moisture Resistant
- 650' Range
- Wireless Transmission:
- Digital Bluetooth
- Included Transmitters:
- 1 x Clip-On with Microphone
- Max Operating Range:
- Max Systems per Setup:
- Not Specified by Manufacturer
- Audio Codec:
- Receiver Form Factor:
- Receiver Mounting Options:
- Shoe-Mount (with Included Hardware)
- Receiver Number of Audio Channels:
- Receiver Audio I/O:
- 1 x 1/8" / 3.5 mm TRS Female Unbalanced Output
- Receiver Frequency Response:
- 20 Hz to 20 kHz
- Receiver Power Requirements:
- Battery, Proprietary Power Adapter
- Receiver Battery Type:
- 1 x Built-In Rechargeable (Included)
- Receiver Approx. Battery Life:
- 3 Hours
- Receiver Display & Indicators:
- LED (Battery Status, Sync)
- Receiver Housing:
- Receiver Operating Temperature:
- 32 to 104°F
- Receiver Storage Temperature:
- -4 to 113°F
- Receiver Dimensions:
- 1.3 x 1.1 x 2.1"
- Receiver Weight:
- 1 oz
- Transmitter Form Factor:
- Clip-On with Microphone
- Transmitter Audio I/O:
- 1 x 1/8" / 3.5 mm TRS Female Unbalanced Input
- Transmitter Auto-Level Control:
- Transmitter Gain Range:
- 0 to +20 dB (10 dB Steps)
- Transmitter Power Requirements:
- Transmitter Battery Type:
- 1 x Built-In Rechargeable (Included)
- Transmitter Approx. Battery Life:
- 3 Hours (Lithium)
- Transmitter Display & Indicators:
- LED (Battery Status, Sync)
- Transmitter Housing:
- Transmitter Dimensions:
- 1.2 x 2.7 x 0.7"
- Transmitter Weight:
- 1 oz
- Microphone Form Factor:
- Microphone Color:
- Microphone Sound Field:
- Microphone Capsule:
- Electret Condenser
- Microphone Polar Pattern: