Description
RENTAL ONLY - Manfrotto 055XB Tripod w/ MVH500AH Fluid Head
The Manfrotto 055XB Aluminum Tripod builds on the success of the 3011/3021 series, but has been redesigned to offer even better ergonomics of the leg-angle release mechanism, and improved quick action leg locks. While it can reach a maximum working height of 70", it can also be used as low as 2.8" (7cm) by using the low angle adapter built in to the center column.
The black aluminum 055XB provides speedy set-up coupled with added security with quick action, flip-type leg locks, low angle adapter and leg warmers. It is ideal for use with 35mm and light medium format photographic cameras, and digital or conventional type video camcorders.
The Manfrotto 3265 ball grip head is versatile, quick and easy to use. Just grip the handle and you can position your camera anywhere within 180° sphere. Supplied with a quick-release camera plate and a secondary safety lock, built-in bubble level and tension adjustment. Made of cast aluminum. Ideal for 35mm cameras with short or medium focal length lenses.
The MVH500AH Fluid Video Head with Flat Base from Manfrotto is designed with a wide platform, optimal for HDSLR camera bodies. Smooth and precise, it has a maximum weight load of 11 lb and professional quality fluid cartridges on both its pan and tilt axes. It has a pre-set spring-loaded counterbalance of 5.3 lb, its lateral tilt range is -70°/+90° and it provides 360° panning rotation.
The side lock system on the MVH500AH allows the camera and sliding QR plate to click quickly into the head from above, instead of needing to be aligned and slid in from the back. This makes it easier and safer to mount your camera on this head. The head attaches to a tripod via a 3/8"-16 thread and includes a 500PLONG sliding balance plate with a captive 1/4"-20 tie-down screw and a 3/8"-16 adapter bushing. It also provides an Easy Link 3/8" connector on the side of the head to attach accessories such as a video monitor.
The MVH500AH is made from aluminum alloy, measures 3.74" high and provides a bubble level and precision control handle.
Features:
- Optional Ball, Pan/Tilt, Fluid Heads
- Maximum Height: 70.3"
- Supports 15.4 lb
- 3 Section Design
- 4 Leg Angle Settings
- Flip-lock Legs
- Faceted Non-twist Center Column
- Weighs 5.0 lb
- Low Angle Adapter
Specifications
- Material:
- Aluminum alloy
- Maximum Height:
- 70"
- Maximum Height w/o Column Extended:
- 54.1"
- Minimum Height:
- 2.8"
- Folded Length:
- 24"
- Load Capacity:
- 15.4 lb
- Total Weight:
- 5.0 lb
- Leg Stages/Sections:
- 2/3
- Independent Leg Spread:
- Yes, 25, 46, 66, 88°
- Leg Tube Diameters:
- 29.4, 25, 20 mm
- Leg Cross Section:
- Round
- Leg Lock Type:
- Flip-lock
- Spiked / Retractable Feet:
- No, rubber
- Head Mount Thread Size:
- 3/8"-16
- Bubble Level:
- No
- Center Column Type:
- Rapid, friction lock
- Center Column Sections:
- 1
- Center Brace:
- No
- Reversible Column:
- Yes
- Column Cross Section:
- 3-Faceted
- Column Tube Diameter:
- 28 mm
- Suggested Dolly:
- 127. 127VS
